This is a fixed saw, located near the press platen (based on the overall dimensions of the press), opposite side of the operator. The saw carries out the cut…
×
Handling System
RUNOUT CONVEYOR NR.1
The runout roller conveyor can be fixed in case of fixed cut or movable up and down through springs and mechanical cam in case of flying cut system.
READ MORE
QUENCH
Just right after the press before the cooling unit there’s a short lead out table with high temperature resistant rollers and this table can move vertically…
AIR COOLING
OMAV can supply air cooling over and under runout roller conveyor. The cooling can be made with simple fans or with an air duct for a more efficient cooling.
READ MORE
OMAV PULLER
The main feature of OMAV’s Puller is that the movement occurs through a brushless motor and rack – pinion system. Thanks to this drive system we can avoid…
POSITIONABLE HOT SAW
The hot saw can be installed either on the operator side or opposite side according to the different type of puller. If there’s a lateral double puller the saw…
FLYING CUT SAW
The hot saw can be installed either on the operator side or opposite side according to the different type of puller. If there’s a lateral double puller the sa…
RUNOUT ROLLER CONVEYOR NR. 2
The runout roller conveyor moves up and down to place the profiles onto the first belt conveyors (Kevlar Belt No. 1), which are stationed between…
SAMPLE SAW
The sample saw is a fix saw, positioned at the beginning of the cooling table, manually controlled.
The saw blade is located in the bottom part of the machine and rises vertically up in order…
TRANSFER BELTS – COOLING TABLE
The OMAV cooling table is made of different transfer belts which transfer the profiles from runout roller conveyor nr 2 to the stretcher and then from stretcher to saw fee…
AUTOMATIC STRETCHER
OMAV can manufacture stretcher with finger jaws or with flat jaws.
In front of the two heads are foreseen two belts in order to have an easier introduction of…
COLD SAW
The cold saw cut to size the profiles coming from the saw feed conveyor.
The profiles are cut during the advancement phase of the blade; at the end of the horizontal stroke, the blade goes down…
SAW GAUGE SYSTEM
The moveable gauge travels on later guides or overhead guides.
The advancement speed of the profiles is reduced before getting in touch with the stop plate, in order to avoid possible bounces.
READ MOREThe advancement speed of the profiles is reduced before getting in touch with the stop plate, in order to avoid possible bounces.
AUTOMATIC SCRAP HANDLING SYSTEM
OMAV can handle the profiles to be scraped in a complete automatic way.
We can handle short scraps with a tilting table that drops the profiles on a box or a conveyor.
READ MOREWe can handle short scraps with a tilting table that drops the profiles on a box or a conveyor.
SCRAP SHEAR and SCRAP CONVEYOR
The scrap shear is a hydraulically driven automatic shear, which cuts the long scrap in short pieces.
The scraps, after the chopping machine, drop down directly into an…
READ MOREThe scraps, after the chopping machine, drop down directly into an…